99,00Brutto:  117,81

The SmartBeacon shock sensor records vibrations, shocks and climate data.

Out of stock

Delivery time: 3-5 workdays


The SmartBeacon shock sensor records vibrations, shocks and climate data. It contains a 3-axis accelerometer as well as a temperature and humidity sensor. The sensor stores acceleration values that exceed a defined threshold and shock duration. Climate values can be recorded permanently and / or only when they exceed or fall below the threshold. The sensor can be used several times for different transports again and again.

For easy readout of a sensor, the Tec4App for smartphones is also available. For this purpose, data can be transmitted via Bluetooth Low Energy (BLE). Each sensor has a unique ID, which is written on the label and stored as a barcode. In addition, the QR code on the label can be scanned with a smartphone. After scanning the barcode with the Tec4App, it connects to the SmartBeacon via BLE and automatically uploads all sensor data to the Tec4Cloud.

Via a simple browser login, the data can be viewed there afterwards, or automatic transport reports can be created or sent by email. The sensor is protected against splash water in a blue ABS housing with IP 50 protection and a membrane at the housing opening. The battery can be replaced by the user.

Weight 0,047 kg

Length: 79,95 mm
Height: 18,7 mm

Temperature sensor

-40°C to +85°C, 0.2°C accuracy
– 0.1°C resolution
– Upper and lower threshold selectable

Humidity sensor

– 0 % rH … 100 % rH non-condensing
– 2 % rH accuracy; 0.1 % rH resolution
– Threshold value adjustable

Memory / Recording

– Capacity: 5,000 data points as ring buffer

Data transmission and evaluation

– Data transmission via BLE

Bluetooth Low Energy for readout

– Max. 400m range (line of sight)
– Bluetooth 5.0 Long-Range


CR2477 3V lithium 1,000 mAh coin cell battery
– Battery life depends on data rate; up to 1.5 years
– Battery level at delivery: Full
– Battery consumption during inactivity: 5% per year at specified storage conditions
– For transport no marking obligation of the lithium metal button cell (ADR special regulation 188 and IATA DGR)

Operating conditions

– Operating temperature range: -30°C … +60°C
– Storage temperature range: 5°C … +40°C
– Humidity range: 0% rH … 100% rH, non-condensing

Housing + Mounting

ABS housing; screw mounting M3 ISO 7380 FL; optional industrial adhesive tape
– Distance between mounting holes: 80 mm
– Max. Tightening torque: 0.4 – 0.5 Nm

Protection class IP 55

– Sensor protection by membrane
– Weight: approx. 47 g
– Penetration of liquids is to be prevented (corrosion damage/short circuit)

Approvals / Standards

– RED Directive 2014/53/EU
– ROHS Directive 2011/65/EU and WEEE
– REACH Directive 2009/1907/EU
– FCC CFR Title 47 Part 15 Section B
– Contains: FCC ID: X8WBT840
– ICES-003 Contains IC: 4100A-BT840

Shopping Cart